Challenger CL10V3-3 (3ft ext)

Service more vehicles and make more money with the Versymmetric® and Versymmetric® Plus CL10series 2 post lifts. Its exclusive Versymmetric® Technology provides the versatility to safely lift cars, trucks, vans and SUV's symmetrically or asymmetrically within the same service bay, within rated capacity.

With three Versymmetric® 2 post lifts productivity configurations - Max Plus Productivity, Maximum Productivity and Complete Productivity, adjustable height and width options, and custom color options, CL10series two post car lifts are the best choice for professional service facilities.

CL10series comes standard with offset 3-stage front arms allowing them to be stowed in an asymmetric lifting position, rear of the front tires. Unlike many competitor lifts, when the vehicle is driven through, the front arms are capable of directSPOT™ to the vehicle's lifting point without having to reposition the vehicle or shuffle back and forth to reach its recommended lift points.

CL10series 2 post hydraulic auto lifts provide automotive service shops with the right equipment to service the most vehicles on the road in one single auto lift service bay. It's Versymmetric® two lifts in one design makes it both a car lift (asymmetric lifting) and a truck lift (symmetric lifting). What's this really mean? Shops do not get caught in a situation where they cannot safely and properly lift a certain vehicle that comes in for service.

The CL10series two post lift is available in these Versymmetric® Productivity Configurations:

Maximum Productivity (CL10V3)

• Industry first two post auto lift with Versymmetric® Plus offset 3-stage front arms + 3-stage rear arms
• Maximum arm sweep, reach and retraction meets the widest range of recommended lifting points
• Offset front arm provides single sweep spotting - no rolling vehicles back and forth to swing front arm clear of front tire

• Versymmetric®: offset 2-stage front arms
• Industry first two post auto lift with Versymmetric® Plus offset 3-stage front arms + 3-stage rear arms
• Maximum arm sweep, reach and retraction meets the widest range of recommended lifting points
• Offset front arm provides single sweep spotting - no rolling vehicles back and forth to swing front arm clear of front tire
• Also includes Dual Pendant Controls, Document Caddy and Stack Adapter Kit

• Versymmetric®: offset 2-stage front arms
• Industry first two post auto lift with Versymmetric® Plus offset 3-stage front arms + 3-stage rear arms
• Maximum arm sweep, reach and retraction meets the widest range of recommended lifting points
• Offset front arm provides single sweep spotting - no rolling vehicles back and forth to swing front arm clear of front tire
• Also includes Dual Pendant Controls, Document Caddy and Stack Adapter Kit

Conventional Controls

• Single push button powers lift up
• Two handed lowering operation - single point mechanical lock release / release valve

Other standard features include double telescoping screw pads, Heavy-Duty pulley and cable equalization system, 48" elongated carriage, rubber door guards, adjustable arm restraint shafts, single point mechanical lock release and padded overhead shut off.

Optional Accessories

Stack Adapter Extension Kit P/N 10315
Stack Adapter Kit for 10,000 and 12,000 lb. two post and inground car and truck lifts. Drop-in style stack adapters help reach pickup points on vehicles with running boards or side steps. Simply take out the screw pad, drop in the stack adapter extension and replace screw pad to reach lifting points. Stack Adapter Extension Kit includes four 3" Stack Extensions, two 6" Stack Extensions & two Organizer Racks with hardware. Organizer racks mount to automotive lift column to keep adapters within reach. Works with all Challenger two post automotive lifts.

Four Frame Engaging Truck Adapters P/N 10318
Set of 4 frame engaging truck adapters for 10,000, 12,000, 15,000 and 18,000 two post automotive lifts. Frame engaging adapters are ideal for lifting vehicles such as pickup trucks with frames. They provide direct contact to frames without the slipping associated when lifting on slippery, sprayed undercoatings with traditional rubber pads. Cradle provides secure fit to frame in tight spaces. Works with all Challenger above ground two post lifts. 15,000 & 18,000 two post automotive lifts require reducer busing kit part #10317.

Four Reducer Bushings P/N 10317
Set of 4 to use with p/n 10318 Four Frame Engaging Truck Adapters

Two Frame Engaging Truck Adapters P/N 10314
Pair of frame engaging truck adapters for 10,000, 12,000, 15,000 and 18,000 two post automotive lifts. Frame engaging adapters are ideal for lifting vehicles such as pickup trucks with frames. They provide direct contact to frames without the slipping associated when lifting on slippery, sprayed undercoatings with traditional rubber pads. Cradle provides secure fit to frame in tight spaces. Works with all Challenger above ground two post lifts. 15,000 & 18,000 two post automotive lifts require reducer busing kit part #10317.

» Asymmetric or Symmetric lifting in the same service bay
» Uni-body design vehicles
» Vehicles with designated outside lift points
» Wider vehicles
» Low profile vehicles
» Both short and long wheelbases

• 11’ 11-7/8” standard height fits in service bay with 12’ ceiling height
• Optional 2’ column height extensions accommodate higher profile
vehicles
• Double Telescoping Screw Pads adjust to multiple heights minimizing the need for adapters
• Rubber foot pads minimize stress to vehicles with delicate undercoatings
• Padded overhead shut off system prevents vehicle damage
• Single-point mechanical lock release system allows technician to disengage both columns simultaneously
• Rubber door guards protect vehicle from door damage
• Premium powder coat finish provides long-lasting durability
• Plated Arm Restraints and Arm Pins inhibit rust and provide long-lasting durability

CL10V3 Series Available

• CL10V3
• CL10V3-2 2ft Column Extension (164 in. height)
• CL10V3-3 3ft Column Extension (176 in. height)

*Lift capacity ratings are based on loads equally distributed on all four arms.

1. Rise Height is measured with adjustable screw pads in highest position.
2. Specifications are listed with lift at maximum width and/or height settings.
3. Specifications are listed without rubber pad, for measurements with rubber pad add 1/4" (6mm).
4. Optional 3 phase electrical also available (Not available for Quick Cycle models). Specify at time of order.

Standard lift colors are Red and Blue. Optional colors available.

Optional frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.