Challenger CL10V3-3-DPC QC

Service more vehicles and make more money with the Versymmetric® and Versymmetric® Plus CL10series 2 post lifts. Its exclusive Versymmetric Technology provides the versatility to safely lift cars, trucks, vans and SUV's symmetrically or asymmetrically within the same service bay, within rated capacity.

With three Versymmetric® 2 post lifts productivity configurations - Max Plus Productivity, Maximum Productivity and Complete Productivity, adjustable height and width options, and custom color options, CL10series two post car lifts are the best choice for professional service facilities.

CL10series comes standard with offset 3-stage front arms allowing them to be stowed in an asymmetric lifting position, rear of the front tires. Unlike many competitor lifts, when the vehicle is driven through, the front arms are capable of directSPOT™ to the vehicle’s lifting point without having to reposition the vehicle or shuffle back and forth to reach its recommended lift points.

Other standard features include double telescoping screw pads, Heavy-Duty pulley and cable equalization system, 48" elongated carriage, rubber door guards, adjustable arm restraint shafts, single point mechanical lock release and padded overhead shut off system.

DUAL PENDANT POWER:

• Dual pendant power controls expedites vehicle spotting by providing an unobstructed view to lifting points
• Up/Down power button + dual singlepoint technical lock release system provides lift operation from either column
• OSHA compliant keyed lockout safety button

QUICK CYCLE TECHNOLOGY:

Increased rise of speed to 27 seconds from 48 seconds equating to a 42% time savings. Lowering speed is held to a constant 17 seconds (approximately) regardless of the weight of the vehicle.

• Exclusive Versymmetric® Technology provides a versatile 2 Lifts in One™ Design to safely lift vehicles symmetrically or asymmetrically within the same service bay
• Standard offset arm design provides directSPOT™ to vehicle’s front lifting points for built-in productivity
• Double telescoping screw pads adjust from 4-7/8” to 6-3/8” reducing the need for adapters • Rubber door guards protect vehicles from door damage when accessing driver controls
• 11´ 8˝ standard height allows lift to be placed in standard service bay with 12´ ceiling
• Single-point mechanical lock release system allows technician to disengage both column locks simultaneously
• 48˝ elongated carriage design decreases load on bearing • Adjustable arm restraint shafts compensate for uneven floors • Grease fittings located on arm pin bushings minimize corrosion to keep arms swinging freely
• Heavy-Duty 5˝ diameter pulley and 5/16˝cable reduces stress on equalization system and increases cable life
• Fully gusseted base plate design reduces column deflection
• Padded overhead shut off system prevents vehicle damage from being raised too high
• Available 2´ and 3´ column extensions enable technician to work at an ergonomic height when servicing taller vehicles
• Many accessories available - reference the Challenger Lifts 2-Post Accessories sheet for details

• Lifting Capacity: 10,000 lb.
• Rise Height: 74 1/8"
• Column Height: 14´8"
• Cylinder Overall (Full Stroke) 11´11"
• Adjustable Width Overall: 11´6 1/2"/11´11"
• Drive-Thru Clearance: 100/ 104 1/2"
• Floor to Overhead Switch: 170 1/2"
• Front Arm Reach (Min./Max.) Min. 19 13/16 / Max. 42"
• Rear Arm Reach (Min./Max.) Min. 37 5/8" / Max. 60"
• Screw Pad Height: Min. 3 7/8" Max. 6 1/8"
• Inside Columns: 110"
• Low Lock Height: 12"
• Motor: 3HP
• Voltage: 208v-230v (Single Phase Std.)
• Speed of Rise: 27 Sec. (approximate)
• Max. Load Per Platform: 2,500 lb.