The RFJ-6HD 3-Ton "Low Rider" Garage Floor Jack is a true heavy lifter. With a 3-ton lifting capacity, "Quick-Pump" design, durable heavy steel construction and emergency overload system for safety, the RFJ-6HD is the jack to wheel out when working under a hefty ground-hugger.

Built with the same heavy-duty materials as the larger models, the RTJ-1100 allows you to safely and easily remove, transfer and install transmissions, transaxles and other drive-train components weighing up to half a ton.

The original and still the best, TransJak's heavy lifting capabilities and top-notch construction make it the transmission service professional's first choice. Remove, transfer and install transmissions, transaxles and other drive-train components with ease. The fully-adjustable / sliding saddle adapts to just about any passenger car and light truck transmission or assembly. Plus, with its heavy-duty chain anchors and fail-safe overload system, you can feel secure—even with all that metal up in the air. It's just one of the reasons why The TransJak® is America's most popular transmission jack.

The RSC-2TF 2-Ton Folding Shop Crane sports a 1" to 93" lifting range and features a 4-hole position boom, 8-ton capacity long-ram, 6-wheel design for added mobility and a foldable body. Quick-release ring pins make setup and teardown a snap. Heavy steel construction ensures maximum durability and the 4-position boom is reinforced, so flex isn't an issue.

This 20-ton press was designed for heavy use and works great in both repair shops and your home garage. Ideal for the removal and installation of gears, bushings and bearings, the RP-20T also excels at bending, straightening and flattening. The applications are truly endless.

This robust 20-ton press was designed for heavy use in repair shops, but works just as well in your garage. Ideal for the removal and installation of gears, bushings and bearings, the RP-20HD also excels at bending, straightening and flattening. The applications are truly endless.

The Ranger RP-20FC Oil Filter Crusher applies 10 tons of pure, air-operated pressure to just about any used oil filter or can, easily reducing it to 20% - 25% of its original size and removing 95% of the oil. An integrated collection chamber and collector downspout makes oil recovery a cinch. At the drastically reduced size, cans and oil filters are much cheaper to dispose of, so the Ranger RP-20FC is good for the environment AND your bank account. Perfect for crushing light-duty truck and automotive filters. Even the popular 8" tall filters for Cummins and Power stroke diesel-powered vehicles fold beneath the massive weight of this crusher.

When used together, these heavy-duty jack stands will safely support up to 6 tons.

When used together, these heavy-duty jack stands will safely support up to 3 tons.

The RJS-1T High Reach Jack Stand is the ideal selection for stabilizing a lifted vehicle. Totally adaptable, the hardened ACME screw adjusts to heights between 54-1/2" and 80-1/2", while the thick rubber on the stabilization pad provides maximum support. When you pull a transmission or engine from a raised vehicle, you change the weight distribution considerably. Ranger high reach jacks are just the tool to keep everything steady. Also ideal for holding drive-train or exhaust components in position beneath raised vehicles.

The RJS-1TF High Reach Jack Stand is your perfect in-shop helper for stabilizing a lifted vehicle. Totally adaptable, the hardened ACME screw adjusts to heights between 54-1/2" and 80-1/2", while the thick rubber on the stabilization pad provides maximum support. When you pull a transmission or engine from a raised vehicle, you change the weight distribution considerably. Ranger high reach jacks are just the tool to keep everything steady. Also ideal for holding drive-train or exhaust components in position beneath raised vehicles and the foot pedal lets you "jiggle" components for quick alignment.

The RFJ-3T is a professional grade garage floor jack that sports a 6,000-lb. maximum lifting capacity and flanged side plates for extra strength where you need it most. Double-sealed hydraulics and a sturdy steel construction help to protect your investment, while the clever universal-joint release system and roller cam plunger assembly make operation a breeze.

The Ranger model RFJ-3000AL Aluminum Quick Jack is made of the strongest aircraft alloy aluminum available. Not only does it weigh in at a feather-light 39 lbs., but it gets any racecar or hotrod a full 15" off the ground in just a few pumps of its knurled aluminum handle. With a low 3-1/2" profile front-roller, the RFJ-3000AL is perfect for working on ground-hugging, low ground-clearance performance vehicles.

The industrial-grade Ranger RH-50PL is our most popular premium hose reel and features reinforced

The ruggedly crafted RJF-3TQP is a versatile quick-lifter with a 3-Ton lifting capacity. Heavy steel construction and sealed hydraulics guarantee maximum durability, while the built-in safety overload valve protects personnel and equipment. Plus, with the exclusive "Quick-Pump" feature, this jack rises to the chassis challenge with only a single pump of the handle. The RJF-3TQP represents the ultimate in jacking speed and convenience

The RFJ-3TP is a versatile lifting machine designed to meet a variety of everyday duties. Capable of handling a full 6,000 lb. load, this trusty floor jack is made out of heavy gauge steel to ensure maximum durability under tremendous pressure. As with every Ranger floor jack, the RFJ-3TP exceeds all ANSI standards in performance and safety

The Ranger RFJ-3000LPF Low Rider Super-Long Garage Floor Jack features a lowered profile of only 2-3/4" and an astonishing 34" long chassis to easily reach the factory approved jacking points on most low ground-clearance vehicles. With a 1-1/2 ton lifting capacity and accurate direct-drive pump operation, this garage floor jack is the ideal combination of power and precision. Plus, the Ranger RFJ-3000LPF is constructed out of durable heavy steel and employs double-sealed hydraulics to extend the service life, so you know it's built to last.

The RFJ-10TL 10-Ton Long-Frame Garage Floor Jack is designed especially for extreme heavy-duty lifting. It is perfect for servicing truck fleets, bus garages, farms, heavy construction equipment and other vehicles that require access to very low areas. The RFJ-10TL features a foot-operated pump for quicker lifting efficiency, automatic overload safety valve and swivel casters for easy maneuvering around tight spaces.

Sold as a pair, these heavy-duty steel auto dollies move disabled vehicles wherever you want them.

Worldwide EIS 6000 OBD2 Inspection Machine